ESP32 Development Board – Developer Edition

$15.00 $6.99$8.89

The development board breaks out all the module’s pins to 0.1″ headers and provides a CP2102 USB-TTL serial adapter, programming and reset buttons, and a power regulator to supply the ESP32 with a stable 3.3 V. Espressif doubled-down on the CPU resources for the ESP32 with a dual core, running at 160MHz and tons more pins and peripherals.

SKU: DEV-IOT-00016 Categories: , Tags: , ,
  • Description
  • Additional Information
  • Reviews (1)
  • Tutorials

Product Description

Esp32 Development Board

Overview of ESP32 Development Board

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP32 Development Board!
The development board breaks out all the module’s pins to 0.1″ headers and provides a CP2102 USB-TTL serial adapter, programming and reset buttons, and a power regulator to supply the ESP32 with a stable 3.3 V. Espressif doubled-down on the CPU resources for the ESP32 with a dual core, running at 160MHz and tons more pins and peripherals.
Overview of ESP32 Chip

ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles.
ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.
ESP32 is designed for mobile, wearable electronics, and Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.

Key Features

      • CPU and Memory: Xtensa® 32-bit LX6 Dua-core processor, up to 600 DMIPS.
      • 448 KByte ROM
      • 520 KByte SRAM
      • 16 KByte SRAM in RTC.
      • QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
      • Supply Voltage: 2.2V~3.6V


      • 802.11 b/g/n/e/i
      • 802.11 n (2.4 GHz), up to 150 Mbps
      • 802.11 e: QoS for wireless multimedia technology.
      • WMM-PS, UAPSD
      • MPDU and A-MSDU aggregation
      • Block ACK
      • Fragmentation and defragmentation
      • Automatic Beacon monitoring/scanning
      • 802.11 i security features: pre-authentication and TSN
      • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
      • Infrastructure BSS Station mode/SoftAP mode
      • Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
      • UMA compliant and certified
      • Antenna diversity and selection


      • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
      • Class-1, class-2 and class-3 transmitter without external power amplifier
      • Enhanced power control
      • +10 dBm transmitting power
      • NZIF receiver with -98 dBm sensitivity
      • Adaptive Frequency Hopping (AFH)
      • Standard HCI based on SDIO/SPI/UART ? High speed UART HCI, up to 4 Mbps
      • BT 4.2 controller and host stack
      • Service Discover Protocol (SDP)
      • General Access Profile (GAP)
      • Security Manage Protocol (SMP)
      • Bluetooth Low Energy (BLE)
      • ATT/GATT
      • HID
      • All GATT-based profile supported
      • SPP-Like GATT-based profile
      • BLE Beacon
      • CVSD and SBC for audio codec
      • Bluetooth Piconet and Scatternet


      • Internal 8 MHz oscillator with calibration
      • Internal RC oscillator with calibration
      • External 2 MHz to 40 MHz crystal oscillator
      • External 32 kHz crystal oscillator for RTC with calibration
      • Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
      • RTC watchdog


      • 12-bit SAR ADC up to 18 channels
      • 2 × 8-bit D/A converters
      • 10 × touch sensors
      • Temperature sensor
      • 4 × SPI, 2 × I2S, 2 × I2C, 3 × UART
      • 1 host (SD/eMMC/SDIO), 1 slave (SDIO/SPI)
      • Ethernet MAC interface with dedicated DMA and IEEE 1588 suppor
      • CAN 2.0
      • IR (TX/RX)
      • Motor PWM, LED PWM up to 16 channels
      • Hall sensor
      • Ultra low power analog pre-amplifier


      • IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
      • Secure boot
      • Flash encryption
      • 1024-bit OTP, up to 768-bit for customers
      • Cryptographic hardware acceleration: -AES-HASH(SHA-2) library-RSA-ECC-Random Number Generator (RNG)


      • SDK Firmware for fast on-line programming
      • Open source toolchains based on GCC


      • Generic low power IoT sensor hub
      • Generic low power IoT loggers
      • Video streaming from camera
      • Over The Top (OTT) devices
      • Music players – Internet music players – Audio streaming devices
      • Wi-Fi enabled toys – Loggers – Proximity sensing toys
      • Wi-Fi enabled speech recognition devices
      • Audio headsets
      • Smart power plugs
      • Home automation
      • Mesh network


      • Product Dimensions: 55.3mm x 28.0mm x 12.3mm / 2.2″ x 1.1″ x 0.5″
      • Product Weight: 9.6g / 0.3oz



Additional Information

Weight 0.020 kg
Dimensions 18 x 25 x 3 mm




Part Number

32Mb Flash Version, 128Mb Flash Version

1 review for ESP32 Development Board – Developer Edition

  1. 5 out of 5

    (verified owner)

    Received after a month to Sweden. Very good packed in tiny paper cartoon. Supplier very good and positive in communication.

    ESP32 is long awaited big bang in wireless IoT Things with bunch of features packed into same form factor as its predecessor ESP8266. More importantly its feature of putting into ultra low power Deep sleep and waking up again with WiFi ready to go, no need to do hard reset a problem troubled ESP8266 users.

    This ESP Wroom-32 dev board gave a good first impression and looks good quality, worked perfectly in first run. I ordered board without headers and soldered headers by myself. Windows 8.1 PC detected the CP2102 USB-TTL serial chip without asking for any drivers. Followed procedure of setting up as per https://github.com/espressif/arduino-esp32 There were some glitches but managed set it UP and running in few minutes. I will post video tutorial soon on my channel https://www.youtube.com/channel/UChjgqHTZ41qw2-dT_3MjdHg/videos

    One issue in this board is it did not had any LED connected to GPIO pins other than one green color LED that is continuously ON when board is powered UP. I had to connect external LED to check if i could play with GPIOs. But on the contrary, not having any LED onGPIO is also good because this leaves all GPIOs for us to utilize in actual applications.

    Another thing i didn’t like is the Antenna protruding out of the main PCB board. May be this is done on purpose to enhance its range, but not sure. Since, It is thin and looks delicate, I am afraid of breaking it during handling. Because, I was used to NodeMCU board where antenna has been well supported by base PCB.

    Lastly, after some time of operation I noticed strange smell coming out from board, as if something is burning or very hot. I found that with normal wifi sketch running, the 3.3V voltage regulator is quite warm (not very HOT) and so is the actual ESP32 metallic case. This was not the case for ESP8266 (NodeMCU boards).

    Nevertheless, neglecting these minor non-serious CONs, the board worked perfectly and is doing its job well and good. I am eager to play with it more and put to some serious use.

Only logged in customers who have purchased this product may leave a review.

Schematic: https://github.com/AnalogLamb/esp32/blob/master/Schematic__ESP32%20Development%20Board_V2.pdf